Factory High Quality Customized Children's Indoor Playground Rectangular Soft Play Slide Amusement Park High-Capacity

Recently, we have frequently received customer inquiries regarding children's playhouse equipment, with the most common question being about operational management after purchasing such equipment. Below, we will provide a brief response to this issue, hoping it can be helpful to some friends.

To successfully operate a children's playhouse playground, the first step is to select a good location. A poor location often results in more losses than gains. If you encounter a shopping mall that is recruiting tenants, they are likely to welcome your business. For the venue, you can consider leasing it or persuading the mall to become a shareholder. If you decide to take over an existing space, be aware that it may exceed your budget. Additionally, having a teahouse within the mall is advantageous, as it provides a convenient resting area for parents. You can also allocate some space within the venue for a beverage bar. As for the venue size, approximately 200 square meters is generally sufficient. Regarding decoration, it is advisable to entrust this entirely to the manufacturer. Typically, professional playhouse manufacturers handle everything from design to installation in one go. For example, we assist clients comprehensively from design and production to transportation and installation, offering a one-stop solution to eliminate your concerns. This integrated service addresses customer challenges effectively.

Children's Playhouse Equipment

Regarding the planning of children's playhouse equipment, it is recommended to allocate a separate area for activities such as sand painting and glue painting—preferably activities that allow children to sit down and engage comfortably, as this can attract more kids. In addition to planning the playhouse equipment, consider selling beverages and toys within the venue to accelerate capital recovery.

Once the playhouse is established, if managed properly with guidance from the franchisor, profitability is achievable. However, excelling in playground management depends largely on the operator's capabilities. In daily operations, there are numerous ways to reduce costs. Of course, identifying these cost-saving methods requires thoughtful consideration, and we will not elaborate further here.

Finally, here are some simple and effective disinfection methods for children's playhouse equipment:

1. Plastic toys can be soaked in diluted solutions of soapy water, disinfectant laundry detergent, or bleach, then rinsed thoroughly with clean water and dried with a clean cloth or by air-drying.

2. Fabric toys can be scrubbed with soapy water or exposed to direct sunlight.

3. Wooden toys that are moisture-resistant, heat-resistant, and colorfast can be soaked in soapy water and then air-dried.

4. Metal toys can be exposed to sunlight for at least six hours to achieve a sterilizing effect.

5. Children's activity rooms, floors, walls, etc., should be disinfected daily with ultraviolet light irradiation, and indoor spaces should be well-ventilated regularly.

6. Spray disinfection with peroxyacetic acid should be conducted weekly.

7. Toilets and sanitary ware should be regularly sprayed with a 3% Lysol solution.

8. Large indoor and outdoor playhouses should be cleaned with soapy water, disinfectant laundry detergent, or bleach, scrubbed with a clean cloth, and then dried with a clean cloth or by air-drying.

Our indoor playground strictly complies with international safety standards including EN1176, ASTM F 1918, ASTM F 1487, ASTM F 2970, and GB/T 34272, ensuring that every play experience is both joyful and safe. We consistently prioritize quality and safety above all, continuously delivering premium products and attentive services to our valued customers.

ISO9000 Quality Management System In 2005, we passed the ISO 9000:2000 quality management system test and received its certification.	SEDEX Milltyland Amusement is SEDEX 4-Pillar certified, covering Health& Safety,Working Conditions, Environment, and Business Ethics.	CSEI Milltyland Amusement has obtained China's special equipment production license.
TUV  Rheinland All of our soft play products comply  withthe TUV Rheinland EN1176 safety standard.	SGS We work closely with SGS to ensure all materials pass the SGS Govmark flammability and fire test.	ASTM Our products comply with both ASTM F1918-12 and ASTM F2970-17 safety standards.
CE Our products are well certified to meet CE requirements for the world market.	UL Our products comply with UL’s safety  standards for the North America market.	IAAPA  Member  Since 2002 As a IAAPA member since 2002, we  dedicate all of our efforts to providing  the safest and most innovative products.